V8.00.000.2025.06.17

Signed-off-by: Marc S. Weidner <msw@coresecret.dev>

.preseed/partitioning.yaml

@@ -12,35 +12,35 @@ recipe:
   guben0afx256r:
     active: true
     control:
-      # g=GPT || m=MBR
+      ### g=GPT || m=MBR
-      # u=UEFI || b=BIOS
+      ### u=UEFI || b=BIOS
-      # b=btrfs || 4=ext4 only
+      ### b=btrfs || 4=ext4 only
-      # e=ephemeral "/tmp" and "SWAP" || n=non-ephemeral "/tmp" and "SWAP" (yet not supported)
+      ### e=ephemeral "/tmp" and "SWAP" || n=non-ephemeral "/tmp" and "SWAP" (yet not supported)
-      # n0=non RAID || m6=mdadm RAID6 || m5=mdadm RAID5 || b1=btrfs RAID1
+      ### n0=non RAID || m6=mdadm RAID6 || m5=mdadm RAID5 || b1=btrfs RAID1
-      # a="/dev/sda" only setup || b="/dev/sdb" || c="/dev/sdc" and so forth
+      ### a="/dev/sda" only setup || b="/dev/sdb" || c="/dev/sdc" and so forth
-      # f=fixed size || a=automatic size
+      ### f=fixed size || a=automatic size
-      # x256=size of device in GiB
+      ### x256=size of device in GiB
-      # r=rescue partition || n=no rescue partition
+      ### r=rescue partition || n=no rescue partition
       description: "Default: CISS 2025 - GPT - BTRFS - Ephemeral - non RAID - 256GiB - rescue"
-      # MUST be "UEFI" for "gpt" || "BIOS":
+      ### MUST be "UEFI" for "gpt" || "BIOS":
       firmware: "UEFI"
-      # MUST be equal to the second part of the recipe-variables string.
+      ### MUST be equal to the second part of the recipe-variables string.
       id: "guben0afx256r"
       name: "ciss.2025.gpt.btrfs.ephemeral.non-raid.256GiB.rescue"
-      # mdadm RAID settings only (not yet supported)
+      ### mdadm RAID settings only (not yet supported)
       raid:
         enable: false
         disks:
           member: 4
           spare: 1
-        # Only Level "1", "5", "6" and "10" are supported
+        ### Only Level "1", "5", "6" and "10" are supported
         level: 6
-      # MUST be "gpt" for "UEFI" || "msdos":
+      ### MUST be "gpt" for "UEFI" || "msdos":
       table: "gpt"
-      # Only set to "true" if the recipe is tested by the authors. Otherwise, this is set to "false" by default.
+      ### Only set to "true" if the recipe is tested by the authors. Otherwise, this is set to "false" by default.
       syntax: true
-      # Version of the specific recipe.
+      ### Version of the specific recipe.
-      version: "1.0.0"
+      version: "1.1.1"
     dev:
       sda:
         1:
@@ -48,13 +48,13 @@ recipe:
           end: "512MiB"
           bootable: true
           encryption:
-            # MUST be "false" for "/boot/efi":
+            ### MUST be "false" for "/boot/efi":
             enable: false
-            # MUST be "false" for "/boot/efi":
+            ### MUST be "false" for "/boot/efi":
             ephemeral: false
-            # MUST be "false" for "/boot/efi":
+            ### MUST be "false" for "/boot/efi":
             integrity: false
-            # MUST be "false" for "/boot/efi":
+            ### MUST be "false" for "/boot/efi":
             nuke: false
             cipher: ""
             hash: ""
@@ -65,24 +65,22 @@ recipe:
             pbkdf: ""
             rng: ""
           filesystem:
-            # btrfs only
             btrfs:
               checksum: ""
-              # TODO Level 0 is valid for zstd not for lzo
               compress: ""
               level: ""
               dedup: true
+              subvolume: ""
+              snapshot: ""
             format: true
             label: "ESP"
             options: ""
             version: "fat32"
           mount:
-            # MUST be "true" for "/boot/efi":
             enable: true
-            options: ""
+            options: "defaults,nodev,nosuid,noexec,umask=0077"
+            options_snap: ""
             path: "/boot/efi"
-            # Only valid for filesystem version "btrfs":
-            subvolume: ""
           primary: primary
         2:
           begin: "512MiB"
@@ -90,39 +88,38 @@ recipe:
           bootable: false
           encryption:
             enable: true
-            # MUST be "false" for "/boot":
+            ### MUST be "false" for "/boot":
             ephemeral: false
-            # MUST be "false" for "/boot":
+            ### MUST be "false" for "/boot":
             integrity: false
-            # MUST be "false" for "/boot":
+            nuke: true
-            nuke: false
             cipher: "aes-xts-plain64"
             hash: "sha512"
             itertime: "3000"
             key: "512"
             label: "crypt_boot"
             metadatasize: "32MiB"
-            # MUST be "pbkdf" for "/boot":
+            ### MUST be "pbkdf" for "/boot":
             pbkdf: "pbkdf"
             rng: "use-random"
           filesystem:
-            # btrfs only
             btrfs:
-              checksum: ""
+              checksum: "sha256"
-              compress: ""
+              compress: "zstd"
-              level: ""
+              level: "7"
               dedup: true
+              subvolume: "@boot"
+              snapshot: ""
             format: true
-            version: "ext4"
+            version: "btrfs"
-            label: "ext4_boot"
+            label: "btrfs_boot"
             options: ""
           mount:
-            # MUST be "true" for "/boot":
+            ### MUST be "true" for "/boot":
             enable: true
-            options: "defaults,nodev,noexec,nosuid,noatime"
+            options: "defaults,nodev,nosuid,noexec,noatime,compress=no,discard=async,subvol=@boot"
+            options_snap: ""
             path: "/boot"
-            # Only valid for filesystem version "btrfs":
-            subvolume: ""
           primary: primary
         3:
           begin: "2GiB"
@@ -142,12 +139,13 @@ recipe:
             pbkdf: "argon2id"
             rng: "use-random"
           filesystem:
-            # btrfs only
             btrfs:
               checksum: ""
               compress: ""
               level: ""
               dedup: true
+              subvolume: ""
+              snapshot: ""
             format: true
             label: "ext4_rescue"
             options: ""
@@ -155,22 +153,21 @@ recipe:
           mount:
             enable: true
             options: "defaults,nodev"
+            options_snap: ""
             path: "/recovery"
-            # Only valid for filesystem version "btrfs":
-            subvolume: ""
           primary: primary
         4:
           begin: "6GiB"
           end: "8GiB"
           bootable: false
           encryption:
-            # MUST be "true" for ephemeral "SWAP":
+            ### MUST be "true" for ephemeral "SWAP":
             enable: true
-            # MUST be "true" for ephemeral "SWAP":
+            ### MUST be "true" for ephemeral "SWAP":
             ephemeral: true
-            # MUST be "false" for ephemeral "SWAP":
+            ### MUST be "false" for ephemeral "SWAP":
             integrity: false
-            # MUST be "false" for ephemeral "SWAP":
+            ### MUST be "false" for ephemeral "SWAP":
             nuke: false
             cipher: "aes-xts-plain64"
             hash: "sha512"
@@ -181,37 +178,37 @@ recipe:
             pbkdf: "argon2id"
             rng: "use-random"
           filesystem:
-            # btrfs only
             btrfs:
               checksum: ""
               compress: ""
               level: ""
               dedup: true
+              subvolume: ""
+              snapshot: ""
             format: true
-            # MUST be "crypt_swap_ephem" for "SWAP":
+            ### MUST be "crypt_swap_ephem" for "SWAP":
             label: "crypt_swap_ephem"
             options: ""
-            # MUST be "ext4" for ephemeral "SWAP":
+            ### MUST be "ext4" for ephemeral "SWAP":
             version: "ext4"
           mount:
             enable: true
-            options: ""
+            options: "defaults,discard"
+            options_snap: ""
             path: "SWAP"
-            # Only valid for filesystem version "btrfs":
-            subvolume: ""
           primary: primary
         5:
           begin: "8GiB"
           end: "10GiB"
           bootable: false
           encryption:
-            # MUST be "true" for ephemeral "/tmp":
+            ### MUST be "true" for ephemeral "/tmp":
             enable: true
-            # MUST be "true" for ephemeral "/tmp":
+            ### MUST be "true" for ephemeral "/tmp":
             ephemeral: true
-            # MUST be "false" for ephemeral "/tmp":
+            ### MUST be "false" for ephemeral "/tmp":
             integrity: false
-            # MUST be "false" for ephemeral "/tmp":
+            ### MUST be "false" for ephemeral "/tmp":
             nuke: false
             cipher: "aes-xts-plain64"
             hash: "sha512"
@@ -222,24 +219,24 @@ recipe:
             pbkdf: "argon2id"
             rng: "use-random"
           filesystem:
-            # btrfs only
             btrfs:
               checksum: ""
               compress: ""
               level: ""
               dedup: true
+              subvolume: ""
+              snapshot: ""
             format: true
-            # MUST be "crypt_tmp_ephem" for ephemeral "/tmp"
+            ### MUST be "crypt_tmp_ephem" for ephemeral "/tmp"
             label: "crypt_tmp_ephem"
             options: ""
-            # MUST be "ext4" for ephemeral "/tmp"
+            ### MUST be "ext4" for ephemeral "/tmp"
             version: "ext4"
           mount:
             enable: true
-            options: "defaults,rw,nodev,noexec,nosuid,noatime,mode=1777"
+            options: "defaults,rw,nodev,nosuid,noatime,discard,mode=1777"
+            options_snap: ""
             path: "/tmp"
-            # Only valid for filesystem version "btrfs":
-            subvolume: ""
           primary: primary
         6:
           begin: "10GiB"
@@ -248,7 +245,7 @@ recipe:
           encryption:
             enable: true
             ephemeral: false
-            integrity: true
+            integrity: false
             nuke: true
             cipher: "aes-xts-plain64"
             hash: "sha512"
@@ -259,23 +256,22 @@ recipe:
             pbkdf: "argon2id"
             rng: "use-random"
           filesystem:
-            # btrfs only
             btrfs:
               checksum: "sha256"
               compress: "zstd"
               level: "7"
               dedup: true
+              subvolume: "@"
+              snapshot: "@root_snap"
             format: true
             label: "btrfs_root"
             options: ""
             version: "btrfs"
           mount:
-            # MUST be "true" for "/":
             enable: true
-            options: "defaults,errors=remount-ro,noatime"
+            options: "defaults,errors=remount-ro,noatime,compress=zstd:7,discard=async,autodefrag,subvol=@"
+            options_snap: "ro,nodev,nosuid,noexec,nodatacow,subvol=@root_snap"
             path: "/"
-            # Only valid for filesystem version "btrfs":
-            subvolume: "@"
           primary: primary
         7:
           begin: "42GiB"
@@ -284,7 +280,7 @@ recipe:
           encryption:
             enable: true
             ephemeral: false
-            integrity: true
+            integrity: false
             nuke: true
             cipher: "aes-xts-plain64"
             hash: "sha512"
@@ -295,22 +291,22 @@ recipe:
             pbkdf: "argon2id"
             rng: "use-random"
           filesystem:
-            # btrfs only
             btrfs:
               checksum: "sha256"
               compress: "zstd"
               level: "7"
               dedup: true
+              subvolume: "@home"
+              snapshot: "@home_snap"
             format: true
             label: "btrfs_home"
             options: ""
             version: "btrfs"
           mount:
             enable: true
-            options: "defaults,rw,nodev,nosuid,noatime"
+            options: "defaults,nodev,nosuid,relatime,compress=zstd:7,discard=async,autodefrag,subvol=@home"
+            options_snap: "ro,nodev,nosuid,noexec,nodatacow,subvol=@home_snap"
             path: "/home"
-            # Only valid for filesystem version "btrfs":
-            subvolume: "@home"
           primary: primary
         8:
           begin: "42GiB"
@@ -319,7 +315,7 @@ recipe:
           encryption:
             enable: true
             ephemeral: false
-            integrity: true
+            integrity: false
             nuke: true
             cipher: "aes-xts-plain64"
             hash: "sha512"
@@ -330,22 +326,22 @@ recipe:
             pbkdf: "argon2id"
             rng: "use-random"
           filesystem:
-            # btrfs only
             btrfs:
               checksum: "sha256"
               compress: "zstd"
               level: "7"
               dedup: true
+              subvolume: "@usr"
+              snapshot: ""
             format: true
             label: "btrfs_usr"
             options: ""
             version: "btrfs"
           mount:
             enable: true
-            options: "defaults,rw,nodev,noatime"
+            options: "defaults,nodev,relatime,compress=zstd:7,discard=async,subvol=@usr"
+            options_snap: ""
             path: "/usr"
-            # Only valid for filesystem version "btrfs":
-            subvolume: "@usr"
           primary: primary
         9:
           begin: "126GiB"
@@ -354,7 +350,7 @@ recipe:
           encryption:
             enable: true
             ephemeral: false
-            integrity: true
+            integrity: false
             nuke: true
             cipher: "aes-xts-plain64"
             hash: "sha512"
@@ -365,22 +361,22 @@ recipe:
             pbkdf: "argon2id"
             rng: "use-random"
           filesystem:
-            # btrfs only
             btrfs:
               checksum: "sha256"
               compress: "zstd"
               level: "7"
               dedup: true
+              subvolume: "@var"
+              snapshot: "@var_snap"
             format: true
             label: "btrfs_var"
             options: ""
             version: "btrfs"
           mount:
             enable: true
-            options: "defaults,rw,nodev,nosuid,noatime"
+            options: "defaults,nodev,nosuid,relatime,compress=zstd:7,discard=async,subvol=@var"
+            options_snap: "ro,nodev,nosuid,noexec,nodatacow,subvol=@var_snap"
             path: "/var"
-            # Only valid for filesystem version "btrfs":
-            subvolume: "@var"
           primary: primary
         10:
           begin: "190GiB"
@@ -389,7 +385,7 @@ recipe:
           encryption:
             enable: true
             ephemeral: false
-            integrity: true
+            integrity: false
             nuke: true
             cipher: "aes-xts-plain64"
             hash: "sha512"
@@ -400,22 +396,22 @@ recipe:
             pbkdf: "argon2id"
             rng: "use-random"
           filesystem:
-            # btrfs only
             btrfs:
               checksum: "sha256"
               compress: "zstd"
               level: "7"
               dedup: true
+              subvolume: "@var_log"
+              snapshot: ""
             format: true
             label: "btrfs_var_log"
             options: ""
             version: "btrfs"
           mount:
             enable: true
-            options: "defaults,rw,nodev,noexec,nosuid,noatime"
+            options: "defaults,nodev,nosuid,noexec,noatime,nodatacow,compress=zstd:7,discard=async,subvol=@var_log"
+            options_snap: ""
             path: "/var/log"
-            # Only valid for filesystem version "btrfs":
-            subvolume: "@var_log"
           primary: primary
         11:
           begin: "206GiB"
@@ -424,7 +420,7 @@ recipe:
           encryption:
             enable: true
             ephemeral: false
-            integrity: true
+            integrity: false
             nuke: true
             cipher: "aes-xts-plain64"
             hash: "sha512"
@@ -435,22 +431,22 @@ recipe:
             pbkdf: "argon2id"
             rng: "use-random"
           filesystem:
-            # btrfs only
             btrfs:
               checksum: "sha256"
               compress: "zstd"
               level: "7"
               dedup: true
+              subvolume: "@var_log_audit"
+              snapshot: ""
             format: true
             label: "btrfs_var_log_audit"
             options: ""
             version: "btrfs"
           mount:
             enable: true
-            options: "defaults,rw,nodev,noexec,nosuid,noatime"
+            options: "defaults,nodev,nosuid,noexec,noatime,nodatacow,compress=zstd:7,discard=async,subvol=@var_log_audit"
+            options_snap: ""
             path: "/var/log/audit"
-            # Only valid for filesystem version "btrfs":
-            subvolume: "@var_log_audit"
           primary: primary
         12:
           begin: "222GiB"
@@ -470,22 +466,22 @@ recipe:
             pbkdf: "argon2id"
             rng: "use-random"
           filesystem:
-            # btrfs only
             btrfs:
               checksum: "sha256"
               compress: "zstd"
               level: "7"
               dedup: true
+              subvolume: "@var_tmp"
+              snapshot: ""
             format: true
             label: "btrfs_var_tmp"
             options: ""
             version: "btrfs"
           mount:
             enable: true
-            options: "defaults,rw,nodev,noexec,nosuid,noatime"
+            options: "defaults,nodev,nosuid,noatime,compress=zstd:7,nodatacow,discard=async,subvol=@var_tmp"
+            options_snap: ""
             path: "/var/tmp"
-            # Only valid for filesystem version "btrfs":
-            subvolume: "@var_tmp"
           primary: primary
         13:
           begin: "238GiB"
@@ -496,31 +492,31 @@ recipe:
             ephemeral: false
             integrity: false
             nuke: true
-            cipher: ""
+            cipher: "aes-xts-plain64"
-            hash: ""
+            hash: "sha512"
-            itertime: ""
+            itertime: "3000"
-            key: ""
+            key: "512"
-            label: ""
+            label: "crypt_opt"
-            metadatasize: ""
+            metadatasize: "32MiB"
-            pbkdf: ""
+            pbkdf: "argon2id"
-            rng: ""
+            rng: "use-random"
           filesystem:
-            # btrfs only
             btrfs:
-              checksum: ""
+              checksum: "sha256"
-              compress: ""
+              compress: "zstd"
-              level: ""
+              level: "7"
               dedup: true
-            format: false
+              subvolume: "@opt"
-            label: ""
+              snapshot: ""
+            format: true
+            label: "btrfs_opt"
             options: ""
-            version: ""
+            version: "btrfs"
           mount:
-            enable: false
+            enable: true
-            options: ""
+            options: "defaults,nodev,nosuid,relatime,compress=zstd:7,discard=async,subvol=@opt"
-            path: ""
+            options_snap: ""
-            # Only valid for filesystem version "btrfs":
+            path: "/opt"
-            subvolume: ""
           primary: primary
 
 # vim: number et ts=2 sw=2 sts=2 ai tw=128 ft=yaml:

func/2015_helper_modules.sh

@@ -31,42 +31,6 @@ do_in_target() {
     "${ary_chroot_command[@]}"
 }
 
-#######################################
-# Wrapper around 'printf' for clean code.
-# Globals:
-#   C_RES
-# Arguments:
-#   $1: One of "${C_BLA}" | "${C_RED}" | "${C_GRE}" | "${C_YEL}" | "${C_BLU}" | "${C_MAG}" | "${C_CYA}" | "${C_WHI}"
-#   $2: Text string to print on terminal.
-#######################################
-do_print_color() {
-  printf "%s\n" "${1}${2}${C_RES}"
-}
-
-#######################################
-# Wrapper around 'printf' for clean, uniform terminal output and line fold for long text strings for better readability.
-# Globals:
-#   C_RES
-# Arguments:
-#   $1: One of "${C_BLA}" | "${C_RED}" | "${C_GRE}" | "${C_YEL}" | "${C_BLU}" | "${C_MAG}" | "${C_CYA}" | "${C_WHI}"
-#   $2: Text string to print on terminal.
-#######################################
-do_print_fold() {
-  declare var_color="$1"; shift
-  declare var_msg_string="$*"
-  declare var_formatted_string="${var_color}${var_msg_string}${C_RES}"
-  printf "%b\n" "${var_formatted_string}" | fold -s -w 76 | sed '1! s/^/    /'
-}
-
-#######################################
-# Wrapper around 'printf' for logfile redirect.
-# Arguments:
-#   $1: Text string to redirect to a log file.
-#######################################
-do_print_log() {
-  printf "%s\n" "${1}"
-}
-
 #######################################
 # Helper Module to generate a Subnet Mask out of an IP in CCDIR Notation.
 # Arguments:
@@ -89,53 +53,6 @@ generate_subnetmask() {
   return 0
 }
 
-#######################################
-# Converts characters such as spaces, inverted commas, backslashes, and other special
-# characters so that they can be safely used as arguments in a shell command.
-# Arguments:
-#   $1: String to sanitize.
-#######################################
-sanitize_input() {
-  # shellcheck disable=SC2155
-  declare var_safe_out=$(printf "%q" "$1")
-  echo "${var_safe_out}"
-}
-
-#######################################
-# Remove any leading or trailing whitespace.
-# Arguments:
-#   $1: String to clean.
-#######################################
-remove_whitespace() {
-  # shellcheck disable=SC2155
-  declare var_out=$(printf "%s" "$1" | xargs)
-  echo "${var_out}"
-}
-
-#######################################
-# Function to escape all shell metacharacters
-# Arguments:
-#   $1: String to Sanitize
-#######################################
-sanitize_shell_literal() {
-  declare input="$1"
-  ### %q quotes the string so that the shell re-reads it as the original literal
-  printf '%q' "${input}"
-}
-
-#######################################
-# Function to remove any character not in the allowed set
-# Arguments:
-#   $1: String to Sanitize
-#######################################
-sanitize_string() {
-  declare input="$1"
-  ### Define allowed characters:
-  ### letters, digits, dot, underscore, slash, equals, [, ], colon, double-quote, hyphen, space.
-  declare allowed='a-zA-Z0-9._/=\[\]:"\-+ '
-  printf '%s' "${input}" | tr -cd "${allowed}"
-}
-
 #######################################
 # Helper module for full upgrade, autoremove and autoclean.
 # Arguments:
@@ -148,66 +65,4 @@ update_upgrade() {
   apt-get autopurge -y
   apt-get autoremove -y
 }
-
-#######################################
-# Wrapper for secure curl.
-# Globals:
-#   ERR_DOWNLOAD_FAILED
-#   ERR_NO_DOWNLOAD_ARG
-# Arguments:
-#   $1: URL from which to download a specific file.
-#   $2: /path/to/file to be saved to.
-# Returns:
-#   ${ERR_DOWNLOAD_FAILED}: Download failed.
-#   ${ERR_NO_DOWNLOAD_ARG}: No arguments specified.
-#######################################
-scurl() {
-  if [[ $# -ne 2 ]]; then
-    do_log "error" "false" "Usage: scurl <URL> <path/to/file>"
-    return "${ERR_NO_DOWNLOAD_ARG}"
-  fi
-  declare url="$1"
-  declare output_path="$2"
-  if ! curl --doh-url "https://dns01.eddns.eu/dns-query" \
-            --doh-cert-status \
-            --tlsv1.3 \
-            -sSf \
-            -o "${output_path}" \
-            "${url}"
-  then
-    do_log "error" "false" "Download failed for URL: '${1}'."
-    return "${ERR_DOWNLOAD_FAILED}"
-  fi
-}
-
-#######################################
-# Wrapper for secure wget.
-# Globals:
-#   ERR_DOWNLOAD_FAILED
-#   ERR_NO_DOWNLOAD_ARG
-# Arguments:
-#   $1: URL from which to download a specific file.
-#   $2: /path/to/file to be saved to.
-# Returns:
-#   ${ERR_DOWNLOAD_FAILED}: Download failed.
-#   ${ERR_NO_DOWNLOAD_ARG}: No arguments specified.
-#######################################
-swget() {
-  if [[ $# -ne 2 ]]; then
-    do_log "error" "false" "Usage: swget <URL> <path/to/file>"
-    return "${ERR_NO_DOWNLOAD_ARG}"
-  fi
-  declare url="$1"
-  declare output_path="$2"
-  if ! wget --show-progress \
-            --no-clobber \
-            --https-only \
-            --secure-protocol=TLSv1_3 \
-            -qO "${output_path}" \
-            "${url}"
-  then
-    do_log "error" "false" "Download failed for URL: '${1}'."
-    return "${ERR_DOWNLOAD_FAILED}"
-  fi
-}
 # vim: number et ts=2 sw=2 sts=2 ai tw=128 ft=sh

func/2016_helper_print.sh

@@ -0,0 +1,50 @@
+#!/bin/bash
+# SPDX-Version: 3.0
+# SPDX-CreationInfo: 2025-06-17; WEIDNER, Marc S.; <msw@coresecret.dev>
+# SPDX-ExternalRef: GIT https://git.coresecret.dev/msw/CISS.debian.installer.git
+# SPDX-FileContributor: WEIDNER, Marc S.; Centurion Intelligence Consulting Agency
+# SPDX-FileCopyrightText: 2024-2025; WEIDNER, Marc S.; <msw@coresecret.dev>
+# SPDX-FileType: SOURCE
+# SPDX-License-Identifier: EUPL-1.2 OR LicenseRef-CCLA-1.0
+# SPDX-LicenseComment: This file is part of the CISS.debian.installer.secure framework.
+# SPDX-PackageName: CISS.debian.installer
+# SPDX-Security-Contact: security@coresecret.eu
+
+guard_sourcing
+
+#######################################
+# Wrapper around 'printf' for clean code.
+# Globals:
+#   C_RES
+# Arguments:
+#   $1: One of "${C_BLA}" | "${C_RED}" | "${C_GRE}" | "${C_YEL}" | "${C_BLU}" | "${C_MAG}" | "${C_CYA}" | "${C_WHI}"
+#   $2: Text string to print on terminal.
+#######################################
+do_print_color() {
+  printf "%s\n" "${1}${2}${C_RES}"
+}
+
+#######################################
+# Wrapper around 'printf' for clean, uniform terminal output and line fold for long text strings for better readability.
+# Globals:
+#   C_RES
+# Arguments:
+#   $1: One of "${C_BLA}" | "${C_RED}" | "${C_GRE}" | "${C_YEL}" | "${C_BLU}" | "${C_MAG}" | "${C_CYA}" | "${C_WHI}"
+#   $2: Text string to print on terminal.
+#######################################
+do_print_fold() {
+  declare var_color="$1"; shift
+  declare var_msg_string="$*"
+  declare var_formatted_string="${var_color}${var_msg_string}${C_RES}"
+  printf "%b\n" "${var_formatted_string}" | fold -s -w 76 | sed '1! s/^/    /'
+}
+
+#######################################
+# Wrapper around 'printf' for logfile redirect.
+# Arguments:
+#   $1: Text string to redirect to a log file.
+#######################################
+do_print_log() {
+  printf "%s\n" "${1}"
+}
+# vim: number et ts=2 sw=2 sts=2 ai tw=128 ft=sh

func/2017_helper_sanitizer.sh

@@ -0,0 +1,49 @@
+#!/bin/bash
+# SPDX-Version: 3.0
+# SPDX-CreationInfo: 2025-06-17; WEIDNER, Marc S.; <msw@coresecret.dev>
+# SPDX-ExternalRef: GIT https://git.coresecret.dev/msw/CISS.debian.installer.git
+# SPDX-FileContributor: WEIDNER, Marc S.; Centurion Intelligence Consulting Agency
+# SPDX-FileCopyrightText: 2024-2025; WEIDNER, Marc S.; <msw@coresecret.dev>
+# SPDX-FileType: SOURCE
+# SPDX-License-Identifier: EUPL-1.2 OR LicenseRef-CCLA-1.0
+# SPDX-LicenseComment: This file is part of the CISS.debian.installer.secure framework.
+# SPDX-PackageName: CISS.debian.installer
+# SPDX-Security-Contact: security@coresecret.eu
+
+guard_sourcing
+
+#######################################
+# Remove any leading or trailing whitespace.
+# Arguments:
+#   $1: String to clean.
+#######################################
+remove_whitespace() {
+  # shellcheck disable=SC2155
+  declare var_out=$(printf "%s" "$1" | xargs)
+  echo "${var_out}"
+}
+
+#######################################
+# Function to escape all shell metacharacters
+# Arguments:
+#   $1: String to Sanitize
+#######################################
+sanitize_input() {
+  declare input="$1"
+  ### %q quotes the string so that the shell re-reads it as the original literal
+  printf '%q' "${input}"
+}
+
+#######################################
+# Function to remove any character not in the allowed set
+# Arguments:
+#   $1: String to Sanitize
+#######################################
+sanitize_string() {
+  declare input="$1"
+  ### Define allowed characters:
+  ### letters, digits, dot, underscore, slash, equals, [, ], colon, double-quote, hyphen, space.
+  declare allowed='a-zA-Z0-9._/=\[\]:"\-+ '
+  printf '%s' "${input}" | tr -cd "${allowed}"
+}
+# vim: number et ts=2 sw=2 sts=2 ai tw=128 ft=sh

func/2018_helper_secure_dl.sh

@@ -0,0 +1,76 @@
+#!/bin/bash
+# SPDX-Version: 3.0
+# SPDX-CreationInfo: 2025-06-17; WEIDNER, Marc S.; <msw@coresecret.dev>
+# SPDX-ExternalRef: GIT https://git.coresecret.dev/msw/CISS.debian.installer.git
+# SPDX-FileContributor: WEIDNER, Marc S.; Centurion Intelligence Consulting Agency
+# SPDX-FileCopyrightText: 2024-2025; WEIDNER, Marc S.; <msw@coresecret.dev>
+# SPDX-FileType: SOURCE
+# SPDX-License-Identifier: EUPL-1.2 OR LicenseRef-CCLA-1.0
+# SPDX-LicenseComment: This file is part of the CISS.debian.installer.secure framework.
+# SPDX-PackageName: CISS.debian.installer
+# SPDX-Security-Contact: security@coresecret.eu
+
+guard_sourcing
+
+#######################################
+# Wrapper for secure curl.
+# Globals:
+#   ERR_DOWNLOAD_FAILED
+#   ERR_NO_DOWNLOAD_ARG
+# Arguments:
+#   $1: URL from which to download a specific file.
+#   $2: /path/to/file to be saved to.
+# Returns:
+#   ${ERR_DOWNLOAD_FAILED}: Download failed.
+#   ${ERR_NO_DOWNLOAD_ARG}: No arguments specified.
+#######################################
+scurl() {
+  if [[ $# -ne 2 ]]; then
+    do_log "error" "true" "Usage: scurl <URL> <path/to/file>"
+    return "${ERR_NO_DOWNLOAD_ARG}"
+  fi
+  declare url="$1"
+  declare output_path="$2"
+  if ! curl --doh-url "https://dns01.eddns.eu/dns-query" \
+            --doh-cert-status \
+            --tlsv1.3 \
+            -sSf \
+            -o "${output_path}" \
+            "${url}"
+  then
+    do_log "error" "true" "Download failed for URL: '${1}'."
+    return "${ERR_DOWNLOAD_FAILED}"
+  fi
+}
+
+#######################################
+# Wrapper for secure wget.
+# Globals:
+#   ERR_DOWNLOAD_FAILED
+#   ERR_NO_DOWNLOAD_ARG
+# Arguments:
+#   $1: URL from which to download a specific file.
+#   $2: /path/to/file to be saved to.
+# Returns:
+#   ${ERR_DOWNLOAD_FAILED}: Download failed.
+#   ${ERR_NO_DOWNLOAD_ARG}: No arguments specified.
+#######################################
+swget() {
+  if [[ $# -ne 2 ]]; then
+    do_log "error" "true" "Usage: swget <URL> <path/to/file>"
+    return "${ERR_NO_DOWNLOAD_ARG}"
+  fi
+  declare url="$1"
+  declare output_path="$2"
+  if ! wget --show-progress \
+            --no-clobber \
+            --https-only \
+            --secure-protocol=TLSv1_3 \
+            -qO "${output_path}" \
+            "${url}"
+  then
+    do_log "error" "true" "Download failed for URL: '${1}'."
+    return "${ERR_DOWNLOAD_FAILED}"
+  fi
+}
+# vim: number et ts=2 sw=2 sts=2 ai tw=128 ft=sh

func/3280_mount_partition.sh

@@ -12,6 +12,21 @@
 
 guard_sourcing
 
+#######################################
+# Validates var_mount_path to be processed.
+# Arguments:
+#   $1 var_mount_path
+# Returns:
+#   0: Skip mounting,
+#   1: Process mount
+#######################################
+skip_path() {
+  declare -a ary_skip=( "/" "/boot" "/boot/efi" "/recovery" )
+  declare p
+  for p in "${ary_skip[@]}"; do [[ "$1" == "$p" ]] && return 0; done
+  return 1
+}
+
 #######################################
 # Function to generate btrfs-subvolumes.
 # Globals:
@@ -25,10 +40,11 @@ create_btrfs_subvolume() {
   declare var_mount_path="$1"
   declare var_subvolume="$2"
 
-  btrfs subvolume create "${TARGET}${var_mount_path}/${var_subvolume}" || {
+  if ! btrfs subvolume create "${TARGET}${var_mount_path}/${var_subvolume}"; then
     do_log "error" "false" "Error occurred at creation of subvolume: '${var_subvolume}' in: '${TARGET}${var_mount_path}'."
-    exit "${ERR_BTRFS_SUBVOL}"
+    return "${ERR_BTRFS_SUBVOL}"
-  }
+  fi
+
   do_log "info" "false" "Created: '${var_subvolume}' at: '${TARGET}${var_mount_path}'."
 }
 
@@ -45,22 +61,14 @@ create_btrfs_subvolume() {
 mount_with_dir() {
   declare var_mount_path="$1" var_mount_device="$2" var_mount_options="$3"
 
-  if [[ "${var_mount_path}" == "/" ]]; then
+  [[ "${var_mount_path}" != "/" ]] && mkdir -p "${TARGET}${var_mount_path}"
-    :
-  else
-    mkdir -p "${TARGET}${var_mount_path}"
-  fi
 
   ### Build the command in an array to keep word boundaries intact
   declare -a ary_cmd=(mount)
-  ary_cmd+=("${var_mount_device}" "${TARGET}${var_mount_path}")
   [[ -n "${var_mount_options}" ]] && ary_cmd+=("-o" "${var_mount_options}")
+  ary_cmd+=("${var_mount_device}" "${TARGET}${var_mount_path}")
 
-  "${ary_cmd[@]}" || {
+  safe_exec "${ary_cmd[@]}" "${ERR_MOUNTING_DEV}" || return
-    do_log "error" "false" "Mounting '${var_mount_device}' on '${TARGET}${var_mount_path}' failed."
-    exit "${ERR_MOUNTING_DEV}"
-    }
-
   do_log "info" "false" "Mounted: '${var_mount_device}' on: '${TARGET}${var_mount_path}' (Options='${var_mount_options}')."
 }
 
@@ -73,9 +81,12 @@ mount_with_dir() {
 #   $4: Encryption Label
 #######################################
 resolve_device() {
-  declare local_var_dev="$1" local_var_partition="$2" encryption_boolean="$3" local_var_enc_label="$4"
+  declare local_var_dev="$1" local_var_partition="$2" local_var_enc_boolean="$3" local_var_enc_label="$4"
-  [[ "${encryption_boolean}" == true ]] && printf '/dev/mapper/%s' "${local_var_enc_label}" \
+  if [[ "${local_var_enc_boolean,,}" == true ]]; then
-                                        || printf '/dev/%s%s' "${local_var_dev}" "${local_var_partition}"
+    printf '/dev/mapper/%s' "${local_var_enc_label}"
+  else
+    printf '/dev/%s%s' "${local_var_dev}" "${local_var_partition}"
+  fi
 }
 
 #######################################
@@ -87,10 +98,26 @@ resolve_device() {
 yq_val() {
   # shellcheck disable=SC2155
   declare var_helper=$(yq e "$1" "$2")
-  [[ "${var_helper}" == "null" ]] && var_helper=""
+  [[ "${var_helper}" == null ]] && var_helper=""
   printf '%s' "${var_helper}"
 }
 
+#######################################
+# Validates btrfs compression algo and level.
+# Arguments:
+#   $1 var_fs_btrfs_compress
+#   $2 var_fs_btrfs_level
+# Returns:
+#   0: Valid combination.
+#   1: Invalid combination.
+#######################################
+validate_btrfs_compression() {
+  declare var_algo="$1" var_level="$2"
+  case "${var_algo}:${var_level}" in
+    zstd:|zstd:[0-9]|zstd:1[0-9]|zstd:2[0-2]|lzo:) return 0 ;;
+    *) do_log "error" "false" "Invalid btrfs compression '${var_algo}:${var_level}'"; return "${ERR_BTRFS_OPTION}" ;;
+  esac
+}
 
 #######################################
 # Function for mounting all partitions for debootstrap, including the generation of btrfs subvolumes.
@@ -110,12 +137,12 @@ mount_partition() {
 
   if [[ -n ${HMP_MOUNTPATH_DEV[$var_mount_path_root]} ]]; then
 
-    mount_with_dir "${var_mount_path_root}" "${HMP_MOUNTPATH_DEV[$var_mount_path_root]}"
+    mount_with_dir "${var_mount_path_root}" "${HMP_MOUNTPATH_DEV[$var_mount_path_root]}" || return "${ERR_MOUNTING_DEV}"
 
   else
 
     do_log "error" "false" "Root-filesystem '${var_mount_path_root}' not found in Hashmap."
-    exit "${ERR_MOUNTING_ROOT}"
+    return "${ERR_MOUNTING_ROOT}"
 
   fi
 
@@ -126,7 +153,7 @@ mount_partition() {
 
     if [[ -n ${HMP_MOUNTPATH_DEV[${var_path}]} ]]; then
 
-      mount_with_dir "${var_path}" "${HMP_MOUNTPATH_DEV[${var_path}]}"
+      mount_with_dir "${var_path}" "${HMP_MOUNTPATH_DEV[${var_path}]}" || return "${ERR_MOUNTING_DEV}"
 
     else
 
@@ -148,76 +175,76 @@ mount_partition() {
     readarray -t ary_parts < <(yq e ".recipe.${VAR_RECIPE_STRING}.dev.${var_dev} | keys | .[]" "${VAR_SETUP_PART}")
     for var_part in "${ary_parts[@]}"; do
 
-    ### Extract parameters from YAML.
+      ### Extract parameters from YAML.
-    var_fs_btrfs_compress=$(yq_val ".recipe.${VAR_RECIPE_STRING}.dev.${var_dev}.${var_part}.filesystem.btrfs.compress" "${VAR_SETUP_PART}")
+      var_fs_btrfs_compress=$(yq_val ".recipe.${VAR_RECIPE_STRING}.dev.${var_dev}.${var_part}.filesystem.btrfs.compress" "${VAR_SETUP_PART}")
-    var_fs_btrfs_level=$(yq_val ".recipe.${VAR_RECIPE_STRING}.dev.${var_dev}.${var_part}.filesystem.btrfs.level"       "${VAR_SETUP_PART}")
+      var_fs_btrfs_level=$(yq_val ".recipe.${VAR_RECIPE_STRING}.dev.${var_dev}.${var_part}.filesystem.btrfs.level"       "${VAR_SETUP_PART}")
-    var_encryption_enable=$(yq_val ".recipe.${VAR_RECIPE_STRING}.dev.${var_dev}.${var_part}.encryption.enable"         "${VAR_SETUP_PART}")
+      var_encryption_enable=$(yq_val ".recipe.${VAR_RECIPE_STRING}.dev.${var_dev}.${var_part}.encryption.enable"         "${VAR_SETUP_PART}")
-    var_encryption_label=$(yq_val ".recipe.${VAR_RECIPE_STRING}.dev.${var_dev}.${var_part}.encryption.label"           "${VAR_SETUP_PART}")
+      var_encryption_label=$(yq_val ".recipe.${VAR_RECIPE_STRING}.dev.${var_dev}.${var_part}.encryption.label"           "${VAR_SETUP_PART}")
-    var_fs_label=$(yq_val ".recipe.${VAR_RECIPE_STRING}.dev.${var_dev}.${var_part}.filesystem.label"                   "${VAR_SETUP_PART}")
+      var_fs_label=$(yq_val ".recipe.${VAR_RECIPE_STRING}.dev.${var_dev}.${var_part}.filesystem.label"                   "${VAR_SETUP_PART}")
-    var_fs_options=$(yq_val ".recipe.${VAR_RECIPE_STRING}.dev.${var_dev}.${var_part}.filesystem.options"               "${VAR_SETUP_PART}")
+      var_fs_options=$(yq_val ".recipe.${VAR_RECIPE_STRING}.dev.${var_dev}.${var_part}.filesystem.options"               "${VAR_SETUP_PART}")
-    var_fs_version=$(yq_val ".recipe.${VAR_RECIPE_STRING}.dev.${var_dev}.${var_part}.filesystem.version"               "${VAR_SETUP_PART}")
+      var_fs_version=$(yq_val ".recipe.${VAR_RECIPE_STRING}.dev.${var_dev}.${var_part}.filesystem.version"               "${VAR_SETUP_PART}")
-    var_mount_path=$(yq_val ".recipe.${VAR_RECIPE_STRING}.dev.${var_dev}.${var_part}.mount.path"                       "${VAR_SETUP_PART}")
+      var_mount_path=$(yq_val ".recipe.${VAR_RECIPE_STRING}.dev.${var_dev}.${var_part}.mount.path"                       "${VAR_SETUP_PART}")
-    var_mount_options=$(yq_val ".recipe.${VAR_RECIPE_STRING}.dev.${var_dev}.${var_part}.mount.options"                 "${VAR_SETUP_PART}")
+      var_mount_options=$(yq_val ".recipe.${VAR_RECIPE_STRING}.dev.${var_dev}.${var_part}.mount.options"                 "${VAR_SETUP_PART}")
-    var_mount_subvolume=$(yq_val ".recipe.${VAR_RECIPE_STRING}.dev.${var_dev}.${var_part}.mount.subvolume"             "${VAR_SETUP_PART}")
+      var_mount_subvolume=$(yq_val ".recipe.${VAR_RECIPE_STRING}.dev.${var_dev}.${var_part}.mount.subvolume"             "${VAR_SETUP_PART}")
 
-    ### Skip already mounted paths ("/", "/boot", "/boot/efi") and skip ("/recovery")
+      ### Skip already mounted paths ("/", "/boot", "/boot/efi") and skip ("/recovery")
-    if [[ "${var_mount_path}" == "/" || "${var_mount_path}" == "/boot" || "${var_mount_path}" == "/boot/efi" || "${var_mount_path}" == "/recovery" ]]; then
+      skip_path "${var_mount_path}" && continue
-      continue
-    fi
 
-    if [[ "${var_mount_path}" == "SWAP" ]]; then
+      if [[ "${var_mount_path}" == "SWAP" ]]; then
 
-      cryptsetup open --type plain --key-file /dev/random \
+        cryptsetup open --type plain --key-file /dev/random \
-        --offset 2048 --cipher aes-xts-plain64 --key-size 512 \
+          --offset 2048 --cipher aes-xts-plain64 --key-size 512 \
-        --sector-size 4096 "/dev/disk/by-label/${var_fs_label}" "${var_encryption_label}"
+          --sector-size 4096 "/dev/disk/by-label/${var_fs_label}" "${var_encryption_label}"
-      mkswap "/dev/mapper/${var_encryption_label}"
+        mkswap "/dev/mapper/${var_encryption_label}"
-      swapon "/dev/mapper/${var_encryption_label}"
+        swapon "/dev/mapper/${var_encryption_label}"
-      do_log "info" "false" "Mounted: '${var_mount_path}' on: '/dev/mapper/${var_encryption_label}'."
+        do_log "info" "false" "Mounted: '${var_mount_path}' on: '/dev/mapper/${var_encryption_label}'."
+        continue
 
-    elif [[ "${var_mount_path}" == "/tmp" ]]; then
+      elif [[ "${var_mount_path}" == "/tmp" ]]; then
 
-      cryptsetup open --type plain --key-file /dev/random \
+        cryptsetup open --type plain --key-file /dev/random \
-        --offset 2048 --cipher aes-xts-plain64 --key-size 512 \
+          --offset 2048 --cipher aes-xts-plain64 --key-size 512 \
-        --sector-size 4096 "/dev/disk/by-label/${var_fs_label}" "${var_encryption_label}"
+          --sector-size 4096 "/dev/disk/by-label/${var_fs_label}" "${var_encryption_label}"
-      mkdir -p "${TARGET}/tmp"
+        mkdir -p "${TARGET}/tmp"
-      mkfs.ext4 "/dev/mapper/${var_encryption_label}" "${var_fs_options:+ $var_fs_options}"
-      mount "${var_mount_options:+-o $var_mount_options}" "/dev/mapper/${var_encryption_label}" "${TARGET}/tmp"
-      do_log "info" "false" "Mounted: '${var_mount_path}' on: '/dev/mapper/${var_encryption_label}'."
 
-    fi
+        if [[ -n "${var_fs_options}" ]]; then
 
-    case "${var_fs_version,,}:${var_encryption_enable}" in
+          mkfs.ext4 -O "${var_fs_options}" "/dev/mapper/${var_encryption_label}"
-      btrfs:true)
+
-        declare var_btrfs_compression_options="compress=${var_fs_btrfs_compress}:${var_fs_btrfs_level}"
+        else
-        # shellcheck disable=SC2155
+
-        declare device=$(resolve_device "${var_dev}" "${var_part}" "${var_encryption_enable}" "${var_encryption_label}")
+          mkfs.ext4 "/dev/mapper/${var_encryption_label}"
-        mount_with_dir "${var_mount_path}" "${device}" "${var_btrfs_compression_options}"
+
-        [[ -n ${var_mount_subvolume} ]] && create_btrfs_subvolume "${var_mount_path}" "${var_mount_subvolume}"
+        fi
-        do_log "info" "false" "Mounted: '${var_mount_path}' on: '${device}'."
+
-        ;;
+        ### Build the command in an array to keep word boundaries intact
-      btrfs:false)
+        declare -a ary_cmd2=(mount)
-        declare var_btrfs_compression_options="compress=${var_fs_btrfs_compress}:${var_fs_btrfs_level}"
+        [[ -n "${var_mount_options}" ]] && ary_cmd2+=("-o" "${var_mount_options}")
-        # shellcheck disable=SC2155
+        ary_cmd2+=("/dev/mapper/${var_encryption_label}" "${TARGET}${var_mount_path}")
-        declare device=$(resolve_device "${var_dev}" "${var_part}" "${var_encryption_enable}" "${var_encryption_label}")
+
-        mount_with_dir "${var_mount_path}" "${device}" "${var_btrfs_compression_options}"
+        safe_exec "${ary_cmd2[@]}" "${ERR_MOUNTING_DEV}" || return "${ERR_MOUNTING_DEV}"
-        [[ -n ${var_mount_subvolume} ]] && create_btrfs_subvolume "${var_mount_path}" "${var_mount_subvolume}"
+        do_log "info" "false" "Mounted: '${var_mount_path}' on: '/dev/mapper/${var_encryption_label}'."
-        do_log "info" "false" "Mounted: '${var_mount_path}' on: '${device}'."
+        continue
-        ;;
+
-      ext4:true)
+      fi
-        # shellcheck disable=SC2155
+
-        declare device=$(resolve_device "${var_dev}" "${var_part}" "${var_encryption_enable}" "${var_encryption_label}")
+      declare device
-        mount_with_dir "${var_mount_path}" "${device}"
+      device=$(resolve_device "${var_dev}" "${var_part}" "${var_encryption_enable}" "${var_encryption_label}")
-        do_log "info" "false" "Mounted: '${var_mount_path}' on: '${device}'."
+
-        ;;
+      case "${var_fs_version,,}:${var_encryption_enable,,}" in
-      ext4:false)
+        btrfs:*)
-        # shellcheck disable=SC2155
+          validate_btrfs_compression "${var_fs_btrfs_compress}" "${var_fs_btrfs_level}" || return "${ERR_BTRFS_OPTION}"
-        declare device=$(resolve_device "${var_dev}" "${var_part}" "${var_encryption_enable}" "${var_encryption_label}")
+          declare var_btrfs_compression_options="compress=${var_fs_btrfs_compress}:${var_fs_btrfs_level}"
-        mount_with_dir "${var_mount_path}" "${device}"
+          [[ -n "${var_mount_options}" ]] && var_btrfs_compression_options+=",${var_mount_options}"
-        do_log "info" "false" "Mounted: '${var_mount_path}' on: '${device}'."
+          mount_with_dir "${var_mount_path}" "${device}" "${var_btrfs_compression_options}" || return "${ERR_MOUNTING_DEV}"
-        ;;
+          [[ -n ${var_mount_subvolume} ]] && create_btrfs_subvolume "${var_mount_path}" "${var_mount_subvolume}"
-      *) do_log "error" "false" "Unsupported fs/encryption combination."
+          ;;
-         exit "${ERR_MOUNTING_DEV}" ;;
+        ext4:*)
-    esac
+          mount_with_dir "${var_mount_path}" "${device}" "${var_mount_options}" || return "${ERR_MOUNTING_DEV}"
+          ;;
+        *) do_log "error" "false" "Unsupported fs/encryption combination."
+           return "${ERR_MOUNTING_DEV}" ;;
+      esac
 
     done
 

lib/1008_guard_safe_exec.sh

@@ -0,0 +1,28 @@
+#!/bin/bash
+# SPDX-Version: 3.0
+# SPDX-CreationInfo: 2025-06-17; WEIDNER, Marc S.; <msw@coresecret.dev>
+# SPDX-ExternalRef: GIT https://git.coresecret.dev/msw/CISS.debian.installer.git
+# SPDX-FileContributor: WEIDNER, Marc S.; Centurion Intelligence Consulting Agency
+# SPDX-FileCopyrightText: 2024-2025; WEIDNER, Marc S.; <msw@coresecret.dev>
+# SPDX-FileType: SOURCE
+# SPDX-License-Identifier: EUPL-1.2 OR LicenseRef-CCLA-1.0
+# SPDX-LicenseComment: This file is part of the CISS.debian.installer.secure framework.
+# SPDX-PackageName: CISS.debian.installer
+# SPDX-Security-Contact: security@coresecret.eu
+
+guard_sourcing
+
+#######################################
+# Generic safe wrapper for external commands.
+# Arguments:
+#   $*: full command (array, quoted!)
+#   $2: ERR_CONST on failure
+#######################################
+safe_exec() {
+  declare -a ary_cmd=("${@:1:$#-1}")  # All but last arg.
+  declare var_errcode="${!#}"         # Last arg.
+  "${ary_cmd[@]}" && return 0
+  do_log "error" "false" "Command '${ary_cmd[*]}' failed."
+  return "${var_errcode}"
+}
+# vim: number et ts=2 sw=2 sts=2 ai tw=128 ft=sh

var/errors.var.sh

@@ -28,10 +28,12 @@ declare -girx ERR_ARG_MISMATCH=242      # The wrong number of optional arguments
 declare -girx ERR_PARTITIONTBL=241      # The partition table is not allowed.
 declare -girx ERR_READ_PARTTBL=240      # The partition could not be deleted, created, or the UUID of the partition could not be read.
 declare -girx ERR_BTRFS_SUBVOL=239      # The btrfs subvolume could not be created.
-declare -girx ERR_MOUNTING_DEV=238      # The Device could not be mounted.
+declare -girx ERR_BTRFS_OPTION=238      # Compression options algo:level not valid btrfs pairs.
-declare -girx ERR_MOUNTING_ROOT=237     # The / Volume could not be mounted.
+declare -girx ERR_MOUNTING_DEV=237      # The Device could not be mounted.
-declare -girx ERR_MOUNTING_LUKS=236     # The LUKS Volume could not be mounted.
+declare -girx ERR_MOUNTING_ROOT=236     # The / Volume could not be mounted.
-declare -girx ERR_UNKNOWN_DEV=235       # Unknown Device Path.
+declare -girx ERR_MOUNTING_LUKS=235     # The LUKS Volume could not be mounted.
+declare -girx ERR_UNKNOWN_DEV=234       # Unknown Device Path.
+